Back to products

Manfrotto Nitrotech N12 & 545B Dual-Leg Tripod System (MVKN12)

KSh 99,999.00 Excl VAT

Nitrotech N12 Fluid Head
26.4-Pound Load Capacity
8.8 to 26.4-Pound Counterbalance Range
75mm Flat Base
Left Side Controls
Illuminated Bubble Level
545B Legs with 100mm Bowl
System Height Range: 29.3 to 66.9″
Half Ball Leveling Adapter, Padded Case

Available on backorder

Compare

Add to wishlist

Category: Tripods & Heads

Overview

EA. Manfrotto Nitrotech N12 & 545B Dual-Leg Tripod System (MVKN12) with its 26.4-pound load capacity, and aluminum legs with a mid-level spreader. The head features a continuously variable counterbalance range from 8.8 to 26.4 pounds, and all controls are located on the left side so you don’t have to take your right hand off the pan handle to operate the head. A specially designed half ball adapter enables mounting this 75mm flat base head onto the included legs with 100mm bowl.

The tripod legs weigh 8 pounds, yet can support up to 55 pounds. Their height range is from 11 to 60″ with the included mid-level spreader. The legs feature a half ball fitting, which requires the inclusion of a flat base to half ball leveling adapter, and you can carry the entire system in the included padded carrying case.

Manfrotto Nitrotech N12 Video Head

The Manfrotto Nitrotech N12 & 545B Dual-Leg Tripod features an innovative, continuous counterbalance system based on a nitrogen-piston mechanism. Unlike heads with stepped levels of counterbalance, the Nitrotech N12 can be precisely adjusted to the weight of your camera rig. Adjust the counterbalance by twisting the knob on the left side towards the front of the head. The knob itself can be extended with a pull, adding room useful with a wider camera. With a maximum payload capacity of 26.4 pounds, the Nitrotech N12 is designed to be used with a variety of video or DSLR/MFT camera rigs. This 75mm flat-base head can be used with a half-ball adapter (available separately) for maximum flexibility in mounting to tripods, sliders, hi-hats, or other supports.

The Nitrotech N12 includes several pro-style features for reliable, efficient use of the head. The included camera mounting plate locks in from the side, and it has a sliding design to help balance the rig on the head. Smooth panning and tilting moves are enabled by the Nitrotech N12’s variable fluid drag systems. A push-button illuminated bubble at the rear of the head lets you see at a glance if the head is leveled. Unlike some other Manfrotto heads, the N12’s controls are on the left side of the head, freeing your right hand to operate the panhandle.

Looking to lessen the weight of accessories on your camera rig? Attach your monitor, rangefinder, light, flag, etc. to the 3/8″-threaded Easy Link Connector built into the side of the Nitrotech N12. This transfers the weight of the accessory away from the camera and to the head, making the camera less top-heavy.

Innovative nitrogen-piston counterbalance system provides precise adjustment based on your camera rig’s weight

Fluid drag system for smooth pan and tilt moves

Lightweight head with 75mm flat base can be used with a half-ball adapter (available separately) for flexible configurations when using tripods, sliders etc.

An Easy Link Connector is embedded in each panhandle mounting rosette, which enables the attachment of an accessory to the head itself, reducing weight on the camera body

Left-sided controls free your right hand for operating the panhandle

Manfrotto 545B Pro Alu Video Tripod

The Manfrotto 545B Pro Alu Video Tripod is a two stage, twin leg, lightweight aluminum professional video tripod. Due to optimization of the upper and lower collars, the tripod guarantees more torsion rigidity and a payload of 55 lb plus improved shooting performance. The die cast aluminum crown features a built-in 100 mm interface bowl, which can be adapted to a 75mm if needed. The tripod is equipped with an innovative mid-level spreader for improved tripod stability. It ships with quick on-off rubber shoes for better grip on smooth floors.